- 195 -
9.3.2 Installation of AC Input Reactor on Power Input Side
An AC input reactor is installed to eliminate the harmonics of the input current. As an optional
device, the reactor can be installed externally to meet strict requirements of an application
environment for harmonics. The following table lists the recommended manufacturers and
models of input reactors.
Table 9-2 Recommended manufacturers and models of AC input reactors
Controller Model Power Capacity (kVA)
Rated Input
Current (A)
AC Input Reactor Model
(Inovance)
Three-phase 380 V, range: -15% to 20%
NICE-L-H-4002 4.0 6.5 MD-ACL-7-4T-222-2%
NICE-L-H-4003 5.9 10.5 MD-ACL-10-4T-372-2%
NICE-L-H-4005 8.9 14.8 MD-ACL-15-4T-552-2%
NICE-L-H-4007 11.0 20.5 MD-ACL-30-4T-113-2%
NICE-L-H-4011 17.0 29.0 MD-ACL-30-4T-113-2%
NICE-L-H-4015 21.0 36.0 MD-ACL-40-4T-153-2%
NICE-L-H-4018 24.0 41.0 MD-ACL-50-4T-183-2%
NICE-L-H-4022 30.0 49.5 MD-ACL-50-4T-183-2%
NICE-L-H-4030 40.0 62.0 MD-ACL-80-4T-303-2%
NICE-L-H-4037 57.0 77.0 MD-ACL-80-4T-303-2%
NICE-L-H-4045 69.0 93.0 MD-ACL-120-4T-453-2%
Three-phase 220 V, range: -15% to 20%
NICE-L-H-2002 4.0 11.0 MD-ACL-15-4T-222-2%
NICE-L-H-2003 5.9 17.0 MD-ACL-30-4T-222-2%
220-NICE-L-H-4007 17.0 29.0 MD-ACL-30-4T-113-2%
220-NICE-L-H-4011 21.0 36.0 MD-ACL-50-4T-113-2%
220-NICE-L-H-4015 24.0 41.0 MD-ACL-50-4T-153-2%
220-NICE-L-H-4018 30.0 40.0 MD-ACL-50-4T-183-2%
220-NICE-L-H-4022 40.0 49.0 MD-ACL-50-4T-183-2%
220-NICE-L-H-4030 57.0 61.0 MD-ACL-80-4T-303-2%
Single-phase 220 V, range: -15% to 20%
NICE-L-H-2002 2.3 13.2
Consult the manufacturer.
NICE-L-H-2003 3.4 17.0
220-NICE-L-H-4007 9.8 29.0
220-NICE-L-H-4011 12.1 36.0
220-NICE-L-H-4015 13.9 41.0
220-NICE-L-H-4018 17.3 40.0
220-NICE-L-H-4022 23.1 49.0
220-NICE-L-H-4030 33.0 61.0
To Next Page
Loading...
