Monarch NICE1000 - 2.5 Physical Appearance and Mounting Dimensions

Product Information NICE1000
new
User Manual
- 26 -
Item Specication
I/O feature
Digital input (DI)
24 x DI
Input specication: 24 V, 5 mA
3 higher-voltage detection input terminals of safety circuit
and door lock circuit
Input specication: 95−125 V
Floor input/output 50 oor button inputs/outputs; functions set exibly
Analog input (AI) AI (voltage range: –10 V to +10 V)
Communication
port
1 CANbus communication ports
1 Modbus communication port
Output terminal
block
27 relay outputs
The terminals can be allocated with different functions.
Encoder interface
Supporting different encoders by using an optional PG
card
Operation and
display
Keypad Used for shaft auto-tuning
LED operation
panel
5-digit LED display, querying/modifying most parameters
and monitoring the system state
NEMS software
Connecting the control system and the host computer,
convenient for querying/motoring the system state.
Environment
Altitude Below 1000 m (de-rated 1% for each 100 m higher)
Ambient
temperature
–10°C to 50°C (de-rated if the ambient temperature is
above 40°C)
Humidity Maximum relative humidity 95%, non-condensing
Vibration Maximum vibration: 5.9 m/s2 (0.6 g)
Storage
temperature
-20°C to 60°C
IP level IP20
Pollution degree PD2
Power distribution
system
TN, TT
2.5 Physical Appearance and Mounting Dimensions
The following gures show the physical appearance and mounting dimensions of the three
different structures of the NICE1000
new
.