Network Setup 4-67
3. Click the Edit button to display a screen used to modify the WMM parameters. For more information, see
Editing WMM Settings on page 4-69.
Transmit Ops Displays the maximum duration a device can transmit after obtaining a transmit
opportunity. For higher-priority traffic categories, this value should be set to a
low number.
CW Min The CW Min is combined with the CW Max to make the Contention screen. From
this range, a random number is selected for the back off mechanism. Lower values
are used for higher priority traffic.
CW Max The CW Max is combined with the CW Min to make the Contention screen. From
this range, a random number is selected for the back off mechanism. Lower values
are used for higher priority traffic.
Max Retries Displays the maximum number of retries for each WMM index.
NOTE When using an AP-7131 in Adaptive AP Mode, you must enable WMM on the
associated WLAN in order to achieve the highest data rates available.
To Next Page
Loading...
