Motorola RFS Series System Reference Guide

4-104 Motorola RF Switch System Reference Guide
5. Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
6. Click OK to use the changes to the running configuration and close the dialog.
7. Click Cancel to close the dialog without committing updates to the running configuration.
4.7.1.4 Adding APs
The Add Radio screen provides a facility for creating a new (unique) radio index for inclusion within the
Configuration screen. Use the Add screen to add the new radio’s MAC address and define its radio type.
To add a Radio to the switch:
1. Select Network > Access Port Radios from the main menu.
2. Click the Configuration tab.
NOTE: For AP 7131, AP 7181, and AP 650 the Rate Settings screen contains MCS data rates in addition
to the basic rates. You can select the Enable Short Guard Interval option in the 11n Modulation
Coding Schemes (MCS) section to increase the data rates. Checking the Enable Basic MCS0-7 option
will allow only 11n capable clients to get connected to this radio.

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English