Motorola RFS Series System Reference Guide

Network Setup 4-121
4. To view the details of individual radio Smart RF information, select a radio from the list and click the
Details button.
5. The Radio Details section shows individual section displays the following information:
Is Detector Displays whether or not an Access Port is a detector or not.Detector status is
determined through Smart RF based on coverage and location of other APs in the
network.
Lock Detector Displays whether or not each Access Port is locked in detector status.
Lock Channel Displays whether or not each Access Port is locked to a specific channel.
Lock Power Displays whether or not each Access Port is locked to a specific power level.
Lock Rescuers Displays whether or not each Access Port is locked to group of rescuer APs.
Switch IP Displays the IP address of the (incomplete)
Description Displays a description of the Radio. Modify the description as required to name
the radio by its intended coverage area or function.
MAC Address Displays the Media Access Control (MAC) Address of the selected AP.
AP Name Displays the name assigned to the AP. The AP name can be configured on the
Access Port Radios Configuration page.
AP Type Displays the type of Access Port detected. The switches support Motorola AP 100,
AP300 and AP650 model Access Ports and AP-4131, AP-5131 and AP-7131 model
Access Points.

Motorola RFS Series Specifications

General

Brand	Motorola
Model	RFS Series
Category	Switch
Language	English