4-178 Motorola RF Switch System Reference Guide
h. Once the location and settings for the advanced hotspot configuration have been defined, click the
Install button to use the hotspot configuration with the switch.
5. Refer to the
Allow List field, and enter any IP address (for internal or external Web sites) that may be
accessed by the Hotspot user without authentication.
6. Check the Use System Name in Hotspot URL to use the System Name specified on the main Switch
configuration screen as part of the hotspot address.
7. Specify the maximum Hotspot Simultaneous Users to set a limit on the number of concurrent unique
hotspot users for the selected WLAN.
8. Check the Logout on Browser Close button to log out hotspot users from the network when they close
their web browsers.
9. Use the Accounting drop-down menu to retrieve accounting information from the switch-managed
network. You can select None, Radius, or Syslog from the menu for retrieving the accounting
information.
10.Click the Radius Configuration button to define the RADIUS server settings.
11.Refer to the Status field for the current state of the requests made from applet. This field displays error
messages if something goes wrong in the transaction between the applet and the switch.
12.Click OK to use the changes to the running configuration and close the dialog.
13.Click Cancel to close the dialog without committing updates to the running configuration.
To Next Page
Loading...
