Network Setup 4-179
4.12.1.4 Configuring a RADIUS Server
1. Select Network > Wired Hotspot > Edit > Radius Configuration. The Radius Configuration screen
opens up. The Radius Configuration screen contains tabs for defining the Radius server settings.
2. Refer to the Radius field and define the following credentials for a primary and secondary Radius server.
RADIUS Server
Address
Enter the IP address of the primary and secondary servers acting as the Radius
user authentication data source.
RADIUS Port Enter the TCP/IP port number for the primary and secondary servers acting as the
Radius user authentication data source. The default port is 1812.
RADIUS Shared
Secret
Provide a shared secret (password) for user credential authentication with the
primary or secondary Radius server.
Server Timeout Enter a value (between 1 and 300 seconds) to indicate the number of elapsed
seconds causing the switch to time out on a request to the primary or secondary
server.
To Next Page
Loading...
