Parker Compax3 I10T10 User Manual

Introduction
C3I10T10
10
192-120100 N16 C3I10T10 - December 2010
1.2 Scope of delivery
The following items are furnished with the device:
 Manuals*
 Installation manual (German, English, French)
 Compax3 DVD
 Startup Guide (German / English)
*Comprehensiveness of documentation depends on device type
 Device accessories
Device accessories for Compax3S
 Cable clamps in different sizes for large area shielding of the motor cable, the
screw for the cable clamp as well as
 the mating plug connectors for the Compax3S plug connectors X1, X2, X3, and
X4
 a toroidal core ferrite for one cable of the motor holding brake
 Lacing cord
 Device accessories for Compax3M
 Cable clamps in different sizes for large area shielding of the motor cable, the
screw for the cable clamp as well as
 the matching plug for the Compax3M connectors X14, X15, X43
 a toroidal core ferrite for one cable of the motor holding brake
 an interface cable (SSK28/23) for communication within the axis combination
 Device accessories for PSUP
 Matching plug for the PSUP connectors X9, X40, X41
 2 bus terminal connectors (BUS07/01) for mains module and the last axis
controller in the combination
 Device accessories for Compax3H
 Mating connector for X3 and X4
 SSK32/20: RS232 adapter cable (programming port C3HxxxV4 - SSK1 - PC)
 VBK17/01: SubD jumper mounted

Parker Compax3 I10T10 Specifications

General

Rated Current	10 A
Protection Class	IP20
Supply Voltage	200-480 VAC
Control Interface	EtherCAT, CANopen
Feedback Options	Resolver