Parker Compax3 I10T10 User Manual

Parker EME
Introduction
192-120100 N16 C3I10T10 - December 2010
11
1.3 Type specification plate
The present device type is defined by the type specification plate (on the housing):
Explanation:
1
Type designation
The complete order designation of the device (2, 5, 6, 9, 8).
2
C3:Abbreviation for Compax3
S025:Single axis device, nominal device current in 100mA (025=2.5A)
M050:Multi-axis device, nominal device current in 100mA (050=5A)
H050:High power device, nominal device current in 1A (050=50A)
D6: Designation nominal supply
V2:Mains supply voltage (2=230VAC/240VAC, 4=400VAC/480VAC)
3
Unique number of the particular device
4
Nominal supply voltage
Power Input: Input supply data
Power Output: Output data
5
Designation of the feedback system
F10:Resolver
F11:SinCos© / Single- or Multiturn
F12: Feedback module for direct drives
6
Device interface
I10:Analog, step/direction and encoder input
I11 / I12:Digital Inputs / Outputs and RS232 / RS485
I20:Profibus DP / I21:CANopen / I22:DeviceNet /
I30:Ethernet Powerlink / I31: EtherCAT / I32: Profinet
C20: integrated controller C3 powerPLmC, Linux & Web server
7
Date of factory test
8
Options
Mxx: I/O extension, HEDA
Sx: optional safety technology on C3M
9
Technology function
T10:Servo drive
T11:Positioning
T30:Motion control programmable according to IEC61131-3
T40:Electronic cam
10
CE compliance
11
Certified safety technology (corresponding to the logo displayed)
12
UL certified (corresponding to the logo displayed)
Compax3 - Type
specification plate
(example):

Parker Compax3 I10T10 Specifications

General

Rated Current	10 A
Protection Class	IP20
Supply Voltage	200-480 VAC
Control Interface	EtherCAT, CANopen
Feedback Options	Resolver