Parker Compax3 I10T10 - Page 25

Parker EME
Compax3 with analogue and step/direction input
192-120100 N16 C3I10T10 - December 2010
25
Operating modes
You can choose between 3 different operating modes:
 ±10V speed command interface with encoder simulation as current value
feedback.
 ±10V predefined current setpoint with encoder emulation for actual position value
feedback and configurable holding functions.
 Step/direction command Input
 With step/direction signals as 24V logic levels or
 With step/direction logic signals conforming to RS422.
 Encoder input
 RS422
 24V level
Configuration is made with a PC with the help of the Compax3 ServoManager.
General proceeding (see on page 98)
Configuration