Compax3 device description
C3I10T10
192-120100 N16 C3I10T10 - December 2010
STO test protocol specimen
General information:
Project/machine:
Servo axis:
Name of the tester:
STO function test:
Test specification according to the
Compax3 release:
STO function test steps 1-6:
o successfully tested
Acknowledgement safety switching device:
o successfully tested
o is not used
Safe stop 1:
o successfully tested
o is not used
Initial acceptance on: Repeat check on:
Signature of the tester Signature of the tester
To Next Page
Loading...
