3.67
ENGINE / COOLING SYSTEM
3
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
Valve Cover Installation
1. Apply An ti-seize a nd install th e sp ark plu g (A ) an d
torque to specification.
2. Prepare va lve cover se aling sur faces by clean ing
tho
roughly to remove all residue.
3. Apply a sm all am ount of crankcase sealant to the
cylinde
r head half-moon cutouts (E) as shown.
4. Install a new valv
e cover seal (B).
5. Install th e ( 3) va lve co ver sh oulder bo lts (C) an d
isola
tors (D) using a T40 driver.
6. Torque valve cover bolts to specification.
Spark Plug:
7 ft. lbs. (10 Nm) Apply Anti-seize
Crankcase Sealant: 2871557
Valve Cover Bolts:
9 ft. lbs. (12 Nm)
To Next Page
Need help?
General
