9.26
BRAKES
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
Caliper Disassembly
1. Remove brake pad adjustment set screw (K).
2. Push up per pad r etainer pin in ward an d slip b rake
p
ads past the edge and remove from the caliper.
3. Remove mounting bracket (B) and dust boots (G) and
(H
).
4. Using a h ammer and a small p unch, r emove the
p
iston (C) from the ca liper bo dy (D) . Rem ove the
square O-rings (E) and (F) from the caliper body (D).
5. Clean the caliper body, piston, and retaining bracket
with br
ake cleaner or alcohol.
NOTE: Be sure to clea n se al groov es in ca liper
body
.
To Next Page
Loading...
