3.69
ENGINE / COOLING SYSTEM
3
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
Starter One-Way Clutch Inspection
1. Remove flywheel as outlined in this chapter.
2. Place flywheel on work bench. Gr
asp gear and rotate
clockwise. It should turn smoothly without binding.
3. Rotate ge ar co unterclockwise. T he g ear sh ould
imm
ediately lock in position and not slip.
4. Inspect inside of hub (A) for
wear, galling, or uneven
surface.
5. Inspect cra nkshaft be aring su rface fo r a bnormal
wear.
6. Remove starter gear from the flywheel assembly.
7. Remove the (3) one-way clutch retaining bolts.
8. Remove clutch and inspect b
oth sides of drive rollers
(B) and roller contact surface (C) inside hub for wear,
damage, or uneven surface.
To Next Page
Loading...
