Polaris 2012 RANGER RZR 570 INTL

8.38
TRANSMISSION
9923523 - 2012 RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
16. Torque the locking screw to specification.
Transmission Assembly
IMPORTANT: The snorkel shaft and pinion shaft must
be inst alled p rior to tra nsmission as sembly. Th e
snorkel shaft cannot be installed after assembling the
transmission.
1. Clean both tra nsmission case ha lves thor oughly.
In
spect case half mating surfaces for damage.
2. Install shift for k ( S) and torsion sp ring i nto
tr
ansmission housing as an assembly. Load spring as
shown in image below
3. Apply Loctite
®
242
™
to (2) screws (T) and install with
retaining plates over shift fork. Torque to specification.
4. Slide engagement dog (U) onto retaining pins of shift
fork.
= T
Snorkel Locking Screw:
8-10 ft. lbs. (11-14 Nm)
8-10 ft. lbs.
(11-14 Nm)
= T
Shift Fork Screws:
7-10 ft. lbs. (10-14 Nm)
S
U
T