2.31
MAINTENANCE
2
9923523 - RANGER RZR 570 Service Manual
© Copyright 2011 Polaris Sales Inc.
Battery Removal
1. Remove the driver’s seat to access the battery.
2. Disconnect the (2) black (neg
ative) battery cables.
3. Disconnect the (2) red (positive) battery cables.
4. Remove the hold-down strap and lift th e battery out
of
the vehicle.
Battery Installation
IMPORTANT: Using a new battery that has not been
fully charged can damage the battery and result in a
shorter life. It can also hinder v ehicle pe rformance.
Follow the battery charging procedure in Chapter 10
“Electrical” before installing the battery.
1. Ensure the battery is fully charged.
2. Place the battery in the battery holder and secure with
h
old-down strap.
3. Coat the terminals with dielectric grease or petroleum
j
elly.
4. Connect and tighten the (2) re
d (positive) cables first.
5. Connect a nd tighten the ( 2) black ( negative) cable
l
ast.
6. Ve
rify that cables are properly routed and reinstall the
driver’s seat.
Battery Off Season Storage
Refer to Chap ter 10 “Electrical” for o ff sea son stor age
procedures.
To reduce the chance of sparks: Whenever
removing the battery, disconnect the black
(negative) cable first. When reinstalling the
battery, install the black (negative) cable last.
To Next Page
Loading...
Need help?
General
