Princeton Instruments PI-MAX4 - Figure 7-9: Typical Experiment Setup Dialog: Timing Tab

138 PI-MAX
®
4 System Manual Issue 9
b. Within the Intensifier section, configure the following parameters:
• Select Gate Mode [radio button];
•Gain: Between 0 and 100.
Configure MCP Gain for between 0 and 100.
c. Click the Timing tab, and configure the following parameters:
• Fast Mode [radio button].
See Figure 7-9.
Figure 7-9: Typical Experiment Setup Dialog: Timing Tab
4411-0139_0053