Princeton Instruments PI-MAX4 - Table A-4: CCD Array Specifications for Non-EM PI-MAX4 Detectors

Appendix A Technical Specifications 269
Refer to Table A-4 for CCD array specifications for non-EM PI-MAX4 detectors.
Table A-4: CCD Array Specifications for non-EM PI-MAX4 Detectors
Parameter 1024i 1024f 1024i-RF 2048f 1024 x 256
CCD KAI-1003
e2v CCD47-10 KAI-1003 e2v CCD42-40 e2v CCD30-11
Illumination Front Front Front Front Front
Architecture Interline
Full-Frame Interline Full-Frame Full-Frame
Resolution 1024 x 1024 1024 x 1024 1024 x 1024 2048 x 2048 1024 x 253
Pixel Size 12.8 µm x 12.8 µm 13.0 µm x 13.0 µm 12.8 µm x 12.8 µm 13.5 µm x 13.5 µm 26.0 µm x 26.0 µm
Active Area 13.1 mm x
13.1 mm
13.3 mm x
13.3 mm
13.1 mm x
13.1 mm
27.6 mm x
27.6 mm
18.0 mm x
6.6 mm
a
25.0 mm x
6.6 mm
b
Readout Ports 2 2221
Frame Rate
c
(full frame)
 26 fps
@32 MHz
 7.69 fps
@10 MHz
 26 fps
@32 MHz
 7.69 fps
@10 MHz
—
Spectral Rate
d
— ———284 fps @ 2MHz
Standard Mode
Readout Rates
4MHz, 16MHz,
32 MHz
1 MHz, 2 MHz,
10 MHz
4MHz, 16MHz,
32 MHz
500 kHz, 1 MHz,
5MHz
500kHz, 1MHz,
2MHz
Deepest Cooling
Temperature at
+20°C ambient
-25°C (air)
-35°C (liquid)
-25°C (air)
-35°C (liquid)
-25°C (air)
-35°C (liquid)
-20°C (air)
-35°C (liquid)
-25°C (air)
-35°C (liquid)
a. Using 18 mm intensifier.
b. Center region using 25 mm intensifier.
c. Binning-dependent
d. Full vertical binning.