Princeton Instruments PI-MAX4 - Figure 4-4: Typical Supersynchro Timing Expander; Table 4-1: Configuration Parameters by Mode

Chapter 4 First Light 53
4. Open the SuperSYNCHRO Timing expander (located above the Status bar.) See
Figure 4-4.
Figure 4-4: Typical SuperSYNCHRO Timing Expander
5.
Configure the Gating parameters as desired. The list of configuration parameters varies
depending on the specific
Mode selected. Refer to Table 4-1.
Table 4-1: Configuration Parameters by Mode
Repetitive Sequential
• Gate Delay;
•
Gate Width;
•
AUX Output Delay;
•
AUX Output Width.
•
Gate Delay;
•
Gate Width;
•
AUX Output Delay;
•
AUX Output Width;
•
Ending Gate Delay;
•
Ending Gate Width.
4411-0139_0078