Chapter 5 Gate Mode Operation 95
This expander is used to access and configure parameters such as:
• Gating Mode;
Valid values for PI-MAX4 are:
— Repetitive;
— Sequential;
— DIF.
• Gate Delay;
• Gate Width;
• AUX Output Delay;
• AUX Output Width.
When
Internal Trigger is the selected Trigger Source or SyncMASTER is turned on, the
Internal Trigger Frequency can also be configured.
Hyperlinks are also provided which open the appropriate expanders for quick access to
configuration settings for:
• Intensifier;
• Trigger;
• Phosphor Decay Delay;
• Number of Frames;
• On-CCD Accumulations;
• Readout Mode.
To Next Page
Loading...
