Quantum Scalar i6000 - Figure 10 I;O Management Unit Bay Layout; I;O Management Unit Bay Numbering Sequence

104 Installing Drives and Blades
I/O Management Unit Bay Numbering Sequence
Figure 10 shows the numbering sequence and the bay positions in the I/O management unit.
Figure 10 I/O Management Unit Bay Layout
Note
Bay 2 is reserved for the control management blade (CMB). Bay 1 is not used.
bay 1 (not used) bay 3 (first FC I/O blade) bay 5 (third FC I/O blade)
bay 4 (second FC I/O blade) bay 6 (not used) bay 8 (second Ethernet
cooling assembly
bay 7 (first Ethernet
bay 2 (CMB)
expansion blade) expansion blade)