148 Setting up Your Library for Access
Changing the Library Security Configuration
The Security Configuration dialog box enables you to restrict external users and various remote services
from accessing the library through the Ethernet port on the MCB. It also enables you to configure the
session timeout.
Accessing the Security Configuration
1 Log on as the service user.
2 Click Setup→ Security.
The Security Configuration dialog box appears with the Services tab displayed.
Configuring Access for Network Services
The Services tab on the Security Configuration dialog box enables you to entirely prevent all external
access to the library or allow access according to other security settings on this dialog box. It also enables
you to allow or prevent access by SSH, SSHv1, and to allow or prevent external attempts to discover the
library by pinging it.
1 Click the Services tab on the Security Configuration dialog box.
Changing security configuration settings using the remote client might cause a
loss of connectivity. If this happens, use the local touch panel to reset the
security configuration settings and restore remote connectivity.
To Next Page
Loading...
