Scalar i6000 Installation Guide 139
Additional Requirements:
• Height of the visible portion of the barcode: 10 mm ±2 mm
• Length of the rest zones: 5.25 mm ±0.25 mm
• No black marks should be present in the intermediate spaces or rest zones
• No white areas should be present on the bars
Importing Cartridges Using the I/E Station
These instructions assume that you have already entered your license key, set up your partitions, and
attached the barcode labels to the cartridges. You will use the I/E station to load cartridges.
1 Make sure that you are viewing the partition into which you want to import a cartridge.
2 From the View menu, select a partition.
3 Click Operations > Import to add cartridges into the partition.
The Import Media dialog box appears.
4 Click Yes if you are prompted to take the partition offline.
To ensure the proper operation of tape cartridges, pickers, and drives, make
sure your hands are dirt- and grease-free before handling tape cartridges.
Clean the sides of all tape cartridges with a clean, dry paper towel or cloth
before installing them in the library.
To Next Page
Loading...
