Scalar i6000 Installation Guide 1
About This Guide and Your Product
This guide contains information and instructions necessary for the installation and configuration of the
Scalar® i6000.
This guide is intended to be used by Quantum professional services and service personnel who will service
the library.
Product Safety Statements
This product is designed for data storage and retrieval using magnetic tape. Any other application is not
considered the intended use. Quantum will not be held liable for damage arising from unauthorized use of
the product. The user assumes all risk in this aspect.
This unit is engineered and manufactured to meet all safety and regulatory requirements. Be aware that
improper use may result in bodily injury, damage to the equipment, or interference with other equipment.
Be sure to read all operating instructions in this manual and in the System, Safety, and
Regulatory Information Guide before operating this product.
Do not obstruct the top or bottom airflow by placing objects above or
below the library. Do not cover ventilation areas on the library.
Do not expose the library to moisture or store the library in
temperatures higher than 60°C (140°F) or extremely low
temperatures. For information about operating temperatures and
humidity, see the Scalar i6000 Planning Guide.
CREATING A HIGH LEAKAGE CURRENT EARTH CONNECTION IS
ESSENTIAL BEFORE YOU CONNECT THE POWER SUPPLY.
BEFORE POWERING ON OR USING THIS EQUIPMENT, READ THE
SYSTEM, SAFETY, AND REGULATORY INFORMATION GUIDE. KEEP
THE GUIDE FOR FUTURE REFERENCE.
To Next Page
Loading...
