164 Configuring the Library
Enabling Licenses
At installation, the library is initially licensed for a default Capacity on Demand (COD) configuration of 102
LTO or 100 DLT cartridge storage slots. You must enable the library’s license keys before you can use more
storage slots and configure those parts of the library that are governed by additional licensing.
The characteristics of licensed functionality include:
• COD quantities are displayed as the number of slots licensed.
• Partition quantities are displayed as the maximum number of partitions possible.
• Other features not licensed by quantity are displayed as “1” in the Quantity column.
If you cannot locate the license keys shipped with the library, you can obtain them by contacting Quantum
Technical Assistance Center at www.quantum.com/support
Follow this procedure to enable your licensed features:
1 If you are not already working from the physical library, select it from the View menu.
2 Click Setup→ Licenses.
The Licenses dialog box appears.
3 In the Enter License Key box, type the appropriate license key. License keys are not case sensitive
and all inclusive. For example, J2BGL-22622-52C22 can be entered as j2bgl-22622-52c22.
4 Click OK.
Licensed features are shown with the status and expiration date for each feature.
Proceed toSetting Up the Network Configuration
on page 165.
To Next Page
Loading...
