174 Configuring the Library
7 Select the severity level that will be reported.
Select level 1, “Failed,” to receive only emergency-related notifications. The severity levels are
numbered from 1 to 3, with 3 being the least severe.
If working from the remote client, select multiple severity levels by holding down CTRL and clicking each
choice.
8 Repeat Step 3
on page 171 through Step 10 on page 174 as often as necessary.
9 In the New Email Notification dialog box, click OK.
10 You are finished entering your specifications, click OK on the System Setup Notification dialog box.
Proceed to Enabling Logical Serial Number Addressing for Drives
on page 175
Level Meaning Type of Information Reported
1 Failed • Library system has failed
• At least one partition (also referred to as a logical library), drive,
or cartridge needs attention
• Service ticket has been posted to the LMC
2 Degraded • Library system is degraded
• Host operations should be possible, but admin should investigate
• Service ticket has been posted to the LMC
3 Warning • Library system is warning about an issue
• Host operations should be possible, but admin should investigate
• Service ticket has been posted to the LMC
To Next Page
Loading...
