Quantum Scalar i6000 Installation Guide

178 Configuring the Library
• Search Information section
The Search Information section allows you to enter on the LDAP server a user name and
password for a user who has sufficient privileges to search for user names. The user name
is specified in distinguished name format. To use this feature administrative user rights are
not required, but you must have the right to search user names in the LDAP directory.
4 Click the Access tab.
Use this tab to configure LDAP authentication.
• Context Information section
• User Context: This is a path in distinguished name format to the location used to search
for the login users. You can search for a user in the context specified and all contexts below
it.
• Group Context: This is a path in distinguished name format to the location used to search
for the groups to which a user belongs. Only groups which are in the Group context or below
are considered for library access.
• Library Access Groups section
• User: This field contains a fully distinguished name of the groups to which all the library
non-admin users belong.
• Admin: This field contains a fully distinguished name of the group to which all admin users
belong.
CAUTION
The first time you use Retrieve TR, the process can take 5
to 10 minutes. To connect to a secure LDAP server, you
must complete the retrieval process.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing