Scalar i6000 Installation Guide 193
The following table describes the elements on the Partitions Status dialog box.
3 To see additional details for a partition, click the partition in the list, and then click Details.
Element Description
Name The name of the partition.
Status The status of the partition (Online or Offline).
Vendor Displays Vendor ID.
Product ID Displays the what type of library the system is reporting as.
Serial Number The serial number of the library.
Media Type The type of media used in the partition (LTO-1, LTO-2, LTO-3, LTO-4,
LTO-5, or DLT).
Interface The type of interface used to connect to the host (FC or SCSI).
#Drives The number of tapes drives in the partition.
#Storage Slots The number of storage slots in the partition.
#I/E Slots The number of I/E station slots in the partition.
Media Type Checking The current setting for media type checking (Required, Not Required,
or Disabled).
Media Identifier The current setting for return media identifier (Suffix, Pass Through,
Prefix, or Disabled).
Drive Autolevel The current setting for drive firmware autoleveling (Enabled or
Disabled).
Auto Drive Clean The current setting for automatic drive cleaning (Enabled or Disabled).
Encryption Reports whether the media is encrypted. The values are Application
Managed or Library Managed.
To Next Page
Loading...
