224 Configuring the Library
4 To assign a magazine for cleaning, click any slot in the magazine to select it. Click Menu, and then click
Assign magazine for cleaning.
The magazine is assigned for cleaning. Repeat this step to assign additional cleaning magazines.
5 To import cleaning media, click the cleaning media in the I/E station to select it, and then do one of the
following:
• To import only the selected piece of media, click Menu, and then click Import <barcode number>
as cleaning media.
• To import all media in the selected I/E station magazine, click Menu, and then click Import all tapes
in magazine as cleaning media.
The cleaning media is moved to an available cleaning magazine, and can be used for automatic or
manual cleaning.
6 Click Close to close the Drive Cleaning Configuration dialog box.
If you are working on the remote LMC, you can right-click a magazine slot or a
piece of cleaning media to see a menu of available options.
To Next Page
Loading...
