Scalar i2000 Installation Guide 305
25 The Aisle Light Settings dialog box appears.
26 Initially to turn the lights on you must choose either 30 minutes or 1 Hour. If you choose Always Off
the aisle lights will not come on.
27 Click OK.
See the Scalar i6000 User’s Guide for more information concerning aisle lights.
28 Visually verify all the aisle lights in your system are on. You can view the aisle lights either through the
top filter of each access door or you can look down the aisle of the system via the side windows.
29 Open and close any I/E station and verify that the aisle lights shut off automatically when the robot scans
the I/E station.
To Next Page
Loading...
