Quantum Scalar i6000 Installation Guide

326 Installation Testing and Verification
6 If prompted to take the library offline, click Yes.
The IVT Pre-Test Questionnaire appears.
7 Complete the pre-test questionnaire by clicking inside the box next to the questions.
You cannot continue with the installation verification test until you have completed and verified the
question requests on this questionnaire.
Note
Make sure you physically verify each of the questions on the questionnaire.
Each of the items listed can cause the installation verification test to have
unexpected behavior and unreliable results. The tests must be re-run if
they fail.

Quantum Scalar i6000 Specifications

General

Form Factor	Rack-mountable
Interface	Fibre Channel, SAS
Product Type	Tape Library
Cooling	Redundant cooling fans
Dimensions	Varies by configuration
Weight	Varies by configuration
Operating Humidity	20% to 80% non-condensing
Scalability	Scalable
Drive Types	LTO
Redundancy	Redundant power supplies
Management	Web-based management
Tape Technology	LTO
Supported Media	LTO Ultrium 9, LTO Ultrium 8, LTO Ultrium 7, LTO Ultrium 6
Power Supply	Redundant power supplies
Non-operating Humidity	5% to 95% non-condensing