Print Function Settings
QL-300 User Guide 137
Size Specifies either millimeters or inches as the
unit for input values.
Print position correction Adjusts the print start position on the paper
edge.
Cut position correction Adjusts the cut position when cutting and
printing roll paper
Media Form Specifies the paper setting type to be regis-
tered.
Size input items change in accordance with
this setting.
Media Type Specifies the paper type.
Media Weight Specifies the paper thickness.
Sensor settings Specifies the settings, from among those
registered on the device, to be used for
printing.
Sensor Adjustment Click to calibrate the gap of black mark or
die-cut labels, and register the results as
device sensor settings.
This button is not displayed for media forms
that do not require calibration.
Printer information acquisition Obtains, from devices, the names of set-
tings registered as sensor settings and the
names of user types registered as paper
types, and reflects them in the sensor set-
tings and paper type list on the printer driver.
Item Description
To Next Page
Loading...
Need help?
General
