Print Function Settings
QL-300 User Guide 159
Roll Paper End Detect Mode Auto
Stop
Forced Cut
Sets the control for ejecting
the trailing edge of the
paper to auto, stop feeding,
or forced cut.
Auto: With this mode, the
trailing edge is processed
appropriately according to
the media.
Stop: With this mode, feed
is forced to stop when the
trailing edge of the paper is
detected, regardless of the
length or type of media.
Forced Cut: With this
mode, the system is forced
to cut and eject the paper
when the trailing edge of
the paper is detected,
regardless of the length or
type of media.
Media Transfer Setting Black 0
+1
+2
+3
-3
-2
-1
Performs fine adjustment if
black is faded or tiny white
spots appear when printing
with the black (K) print car-
tridge only (when printing
with the YMCW print car-
tridges are raised).
Lower the setting value if
there are only fewer white
spots, or raise the setting
value if the high-density
portion is thinner.
Media Transfer Setting Color 0
+1
+2
+3
-3
-2
-1
Performs fine adjustment if
colors are faded or tiny
white spots appear when
printing with two or more
print cartridges or just the
white (W) print cartridge.
Lower the setting value if
there are only fewer white
spots, or raise the setting
value if the high-density
portion is thinner.
Item Value Description
To Next Page
Loading...
