EasyManua.ls Logo

QuickLabel Systems QL-300 - Page 308

QuickLabel Systems QL-300
485 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Troubleshooting
QL-300 User Guide 308
Portion of white background is
lightly stained.
Paper has static electricity. Use paper that has been stored at
appropriate temperature and
humidity.
Thick paper is used. Use thinner paper.
Low toner. Replace the print cartridge.
See “Replacing Print Cartridges”
on page 322.
Border of characters is blurred. LED head is unclean. Wipe LED head with a soft tissue
paper.
See “Cleaning LED Heads” on
page 387.
Paper not suitable. Check the roll paper specifica-
tions, and then use paper that is
described on the roll paper specifi-
cations.
Paper is moist. Replace with new paper.
Rubbing paper removes the toner. Type and thickness setting of paper
is inappropriate.
Correct Media Weight in the con-
trol panel to the appropriate value.
Or, change Media Weight to a
thicker value than the present
value.
Recycled paper is used. Correct Media Weight in the con-
trol panel to the appropriate value.
Or, change Media Weight to a
thicker value than the present
value.
Specks appear on glossy papers. Type and thickness setting of paper
is inappropriate.
Correct Media Weight in the con-
trol panel to the appropriate value.
Or, change Media Weight to a
thicker value than the present
value.
Symptom Cause Troubleshooting

Table of Contents

Related product manuals