Radwin 2000+ SERIES User Manual

RADWIN2000+SeriesUserManual Release4.2.40 6‐19
Ethernet
6.3.2Ethernet
LinkConfiguration:MIMOModes
Ifyouareusingdualantennas,youmaycheckaMIMOMode:SpatialMultiplexing(def ault)
splitsthedataintotwostreamsontransmissionandrecombinesitonreceptionproviding
maximumthroughput.Diversitytransmitsthesamedataonbothantennasandcheckfor
correctnessonreception.ForfurtherdetailsaboutMIMOan
tennamodes,seeInitialLink
Configuration.
LinkConfiguration:TransmissionRatio
TheTransmissionRatioshowstheallocationofthroughputbetweendownlinkanduplink
trafficatRT‐A(HBS).

Radwin 2000+ SERIES Specifications

General

Frequency Bands	5.4 GHz, 5.8 GHz
Channel Bandwidth	5 MHz, 10 MHz, 20 MHz
Encryption	AES-128
Interface	Ethernet
Operating Temperature	-30°C to +60°C
IP Rating	IP67