Radwin 2000+ SERIES - Figure 5-10 Main Window; Master ODU Vs. Slave ODU; The Initial RADWIN Manager Main Window

RADWIN2000+SeriesUserManual Release4.2.40 5‐10
TheInitialRADWINManagerMainWindow
5.6TheInitialRADWINManagerMain
Window
Uponsuccessfullogon,themainwindowisdisplayed:
Figure5‐10:Mainwindowpriortolinkconfiguration
5.7MasterODUvs.SlaveODU
Inapoint‐to‐pointlink,oneradiounitfunctionsasthe“dominant”unit.Thisunitiscalledthe
MasterODU.TheotherunitiscalledtheSlaveODU.Thisterminologydescribestheirrelative
roles.
IntheRADWINManagersoftwareapplication,thedominantunitisalsocalledRadioTerminal
A(RT‐A(HBS)),andtheotherunitiscalledRadioTerminalB(RT‐B(HSU)).Thisterminologyis
takenfrompoint‐to‐multipointtechnology,whereoneunitisaBaseStation(HBS),andisthe
dominantunit,andtheotherunitsareSubscriberUnits(HSU),wheretherecanbemultiple
SubscriberUnits.
All2000+radiosareshippedfromthefactorydefinedasSlaveODUs.Youmustre‐defineone
asaMasterODU.InstructionsfordoingthisarefoundinDefineOneUnitasanRT‐A(HBS).
AlthoughanysidecanbeaMasterODUorSlaveODU,takethefollowingintoconsideration
whendeterminingwhichsidewillbedefinedaseither: