Radwin 2000+ SERIES - Chapter 8: Monitoring and Diagnostics

RADWIN2000+SeriesUserManual Release4.2.40 8‐1
Chapter8:Monitoringand
Diagnostics
TheRADWINManagerapplicationenablesyoutomonitorthelinkbetweentheMasterODU
andSlaveODU,aswellasperformbasicdiagnosticoperationssuchasthroughputtesting.
Thischaptercovers:
• RetrievingLinkInformation
• ThroughputChecking
• RecentEvents
• PerformanceMonitoring
• ManagerTraps
• ActiveAlarms
Otherrelevantfacilitiesinclude:
• LinkBudgetCalculator
• CustomerService
8.1RetrievingLinkInformation
TheGetDiagnosticsfeaturecollectsandwriteslinkandManagerinformationfromselected
sitesintoatextfile.Thefileinformationcanbeusedfordiagnosticsandshouldbesentto
RADWINCustomerServicetoexpediteassistance.
Thefollowingtablelistslinkandsysteminformationthatcanbemonitored.
Table8‐1:GetDiagnosticsDataandDescription
Data Description
SystemData Generalinformationaboutthesystem
EventsLog
•Listofsystemeventsincludingthosefromothersitesifthis
siteisdefinedasthetrapdestination
•Last256eventsfromallsites