Radwin 2000+ SERIES User Manual

RADWIN2000+SeriesUserManual Release4.2.40 13‐5
BulkSoftwareBackup
Figure13‐4:Softwareupgradeinprogress‐Notethestopbutton
Figure13‐5:Softwareupgradecompletedsuccessfully
8. UsethetitlebarexitbuttontodismisstheSoftwareupgradewindow..
13.4BulkSoftwareBackup
YoucanbackupthesectorsoftwareindependentlyofSoftwareUpgradeusingthemain
button menu.SeeSoftwareBackupandRestore.
Ifanysitesfailtoupdate,awarningnoticewillbedisplayed.
Ifoneormoresitesofasectorupdatefails,youshouldcorrectthe
problemandupdatethefailedsitesassoonaspossible.Ifyoudonot,
followingthenextresetoftheupdatedsites,youcouldexperiencealink
so
ftwaremismatchwhichmayaffectservice.

Radwin 2000+ SERIES Specifications

General

Frequency Bands	5.4 GHz, 5.8 GHz
Channel Bandwidth	5 MHz, 10 MHz, 20 MHz
Encryption	AES-128
Interface	Ethernet
Operating Temperature	-30°C to +60°C
IP Rating	IP67