Radwin 2000+ SERIES - Figure 5-6 Log - on Window; Table 5-2 User Types, Default

RADWIN2000+SeriesUserManual Release4.2.40 5‐7
OtherLog‐onOptions

Figure5‐6:Log‐onwindowwithSNMPv3
IfyouareusingTrapAuthentication,entertheUserandPassword.Leavingthesefieldsblank
orincorrect,wi ll notpreventyoufromloggingon.Youwillnotbeabletoseetrapmessages
directedtothetrapmessageaddressassociatedwithadefineduser.Theallocationand
associationofatrapaddresswithauserisdescribedinManagement.
IfyouareconnectingthroughtheRNMSserverchecktheRNMSconnectbuttonandenter
yourserverIPaddress.
Thefollowingtablesummarizestheseoptions:
TheNetworkManagershouldchangethedefaultpasswordsassoonaspossible,particularly
ifSNMPv3istobeused.
Table5‐2:Usertypes,defaultpasswordsandfunction
UserType
Default
Password
Function
SNMPv1 SNMPv3
Community
Communi
tyString
Password
Default
Value
Observer admin Monitoring Read‐Only public Read‐Only public
Operator admin
Installation,
configuration
Read‐Write netman Read‐Write netman
Installer wireless
Operatorplus
set‐band
Read‐Write netman Read‐Write netman