Radwin 2000+ SERIES - Figure 5-7 Unsupported Device; Figure 5-8 Unreachable Device; Incorrect IP Address; Log-On Errors and Cautions

RADWIN2000+SeriesUserManual Release4.2.40 5‐8
Log‐onErrorsandCautions
Onceyouhavesetallfieldsproperly,clickOK.TheRADWINManagermainscreen(Figure 5‐
10)shouldappear.
5.5Log‐onErrorsandCautions
5.5.1UnsupportedDevice
AttemptingtoconnecttoanunsupporteddeviceonanotherwisevalidIPaddress(f or
example,aLANprinter)willresultinthefollowingerrormessage:
Figure5‐7:Unsupporteddevicemessage
5.5.2IncorrectIPAddress
IftheIPaddresschosenisinvalidorthesectorisunreachable,thefollowingerrormessage
willbedisplayed:
Figure5‐8:Unreachabledevicemessage
• LeavethedefaultCommunitypasswords,netmanforread‐write,
andpublicforread‐only.
• Ifyouareauserwithread‐onlypermission,thenyoumayonlylog
onasObserver.
• ThetwofieldsserveasSNMPv1CommunitystringsandSNMPv3
passwords.