Radwin 2000+ SERIES - Table 15-1 Port Settings - I

RADWIN2000+SeriesUserManual Release4.2.40 15‐3
PortFunctionality
IngressDirection
Table15‐1:Portsettings‐Ingressdirection
Transparent
Theport‘doesnothing’withregardtoVLANs‐inboundframesareleft
untouched.
Tag
FramesenteringtheRT‐B(HSU)portwithoutVLANorQinQtaggingare
taggedwithVLANIDandPriority
a
,whicharepreconfiguredbytheuser.
Frameswhicharealreadytaggedatingressarenotmodifiedandpass
through.
a. Priority Code Point (PCP) which refers to the IEEE 802.1p priority. It indicates the frame priority level
from 0 (lowest) to 7 (highest), which can be used to prioritize different classes of traffic (voice, video,
data, etc).
Providertag
FramesenteringtheRT‐B(HSU)portaretaggedwithprovider’sVLANIDand
Prioritywhicharepreconfiguredbytheuser.Frame.swhicharealready
taggedwithProvidertaggingattheingressarenotmodifiedandpassed
through
.