Radwin 2000+ SERIES - Figure 6-12 Add Bandsi

RADWIN2000+SeriesUserManual Release4.2.40 6‐24
ChangingtheLinkBand
• SuchadditionalBandsmustbeavailablewithintheframeworkofyourlocalregulations
TheforegoingappliestobothregulatedandunregulatedBands.
 Toobtainandinstalladditionalbands:
1. AsInstaller,openthewindowofFigure 6‐10above,andclickAddBands.Thefol‐
lowinginstructionpanelisdisplayed:
Figure6‐12:AddBandsInstructionsPanel
TheserialnumbersdisplayedarethoseoftheODUsinthelink.ClickCopytoClip‐
board.
2. Nowcar
ryoutsteps2to5inFigure 6‐12.Step2willtakeyoutoaWebpage,which
containsaformlikethis: