Radwin 2000+ SERIES - Figure 19-4 Band Selector

RADWIN2000+SeriesUserManual Release4.2.40 19‐7
RunningtheLinkBudgetCalculator
Figure19‐4:Bandselector
Forthepurposesofourexample,wewi ll use5.8GHzFCC/ICConnectorized.
3. ChoosetheSeries:
4. ChoosethechannelBandwidth:
5. ChoosetherequiredTxPower.UnderAdaptiveRate,thiswillbetheMaxTxPower
andyoucannotchangeit.
6. Choosetherequiredantennatype‐dualorsingle.Forin
tegratedproductsthisitem
willbedisabled.
7. Entertheradioparametersforeachsite:
CollocatedradiounitsuseRFPEsothereisnoHSSentry