Radwin 2000+ SERIES - Figure 10-7 Setting Rt-A(Hbs); Sync Status Messages and Color Codes

RADWIN2000+SeriesUserManual Release4.2.40 10‐7
SyncStatusMessagesandColorCodes
Figure10‐7:SettingRT‐A(HBS)asHubSyncMasterorHubSyncClient
ContinueTxmeansthattheRT‐A(HBS)asaclientwillcontinuetoworkevenifthereisnoHSS
synchronizationpulse.
IfyouselectHubSyncMasterandclickApply,theConfigurationdisplaychanges:
Figure10‐8:RT‐A(HBS)asHubSiteMaster
SettinguptheRT‐A(HBS)asaclientiscarriedoutinasimilarmanner.
10.5SyncStatusMessagesandColorCodes
ThepossibleExternalPulsesconditionsareshowninthefollowingtable: