Radwin 2000+ SERIES - Figure 7-6 Add or Edit Auser

RADWIN2000+SeriesUserManual Release4.2.40 7‐13
Management
Tomakeanyofthefollowingchanges,youmustbeloggedonasuseradmin.TheSNMPv3
passwordsforadminandoperatorareasfollows:
 ToaddanSNMPv3user:
1. Clicktherighthandediticononanyemptylineofthelist:
2. AnEditwindowisdisplayed:
Figure7‐6:AddorEditauser
3. Enterausernameandpassword.Confirmthep asswordasindicated.
4. ChooseaProfile:
•ReadOnlyprovidesObserverlevellog‐onaccess.
•ReadWriteprovidesOperatorlevellog‐onaccess
• Disabledstorestheuserdetailsinthedatabaseforfutureuse.Itmustbe
changedtoReadOnlyorReadWritetobecomeusable.
Table7‐2:SNMPv3predefine dusers
UserName Password Profile
admin
netwireless ReadWrite
operator
netpublic ReadOnly