Radwin 2000+ SERIES - Configuring the RT-A(HBS) as an HSS Master; Ethernet and TDM Services; Ethernet Services Only; Installing Collocated Hssoe Odus

RADWIN2000+SeriesUserManual Release4.2.40 11‐4
InstallingCollocatedHSSoEODUs
11.3InstallingCollocatedHSSoEODUs
11.3.1EthernetServicesOnly
UseanIDU‐H/HPforthecollocatedODUsinsteadofseparatePoEdevices.
11.3.2EthernetandTDMServices
ForRADWIN2000+SeriesclassODUs:ToattainLayer2connectivityforuptotwosuchODUs,
youshouldconnectoneofthetwotheIDU‐C(orIDU‐E)LANportstotheIDU‐H/HPLANports.
YoumayusethesecondIDU‐C(orIDU‐E)LANporttoconnecttoaswitch.
11.4LinkConfigurationandHSSoE
11.4.1SetupforIllustration
WewillshowhowtosetupourdemonstrationlinkasHSSmasterandHSSclientinturn.(The
secondcollocatedlinkisasimilarunit,thesetupdetailsofwhich,neednotconcernus).
11.4.2ConfiguringtheRT‐A(HBS)asanHSSmast er
 ToconfiguretheRT‐A(HBS)asanHSSoEMaster:
1. LogontotheRT‐A(HBS).
2. OpentheConfigure|HubSiteSynctab.