Radwin 2000+ SERIES - Figure 13-1 Software Upgrade; Figure 13-2 Add; Remove Site

RADWIN2000+SeriesUserManual Release4.2.40 13‐2
UpgradinganInstalledLink
Figure13‐1:SoftwareUpgradeUtility‐Mainwindow
ThedefaultsitesshownintheSoftwareUpgradelistpanelbelongtothecurrently
installedsector.ThelistmaybeemptyifyouarerunningtheRADWINManager
“offline”.
2. TheSoftwareupgradelisttitlebarhasthreebuttonsontherighthandside.
Figure13‐2:Add/Removesitebuttons
TheleftbuttonopensupaWindowsfiledialogtolocatealistoflocationsto
update.Thelisthasthefollowingformat:
<IPaddress>,<Read‐Onlycommunity>,<Read‐Writecommunity>
Forexample:
10.104.3.2,netman
10.104.3.4,netman
ThelistshouldincludeRT‐A(HBS)sandRT‐B(HSU)sabletoacceptthesameupgrade.
Non‐upgradableitemswillresultinanerrormessage.ContactCustomerService
aboutupgradingthem.
Thecenterbuttonallowsyoutoaddasinglesite: