Radwin 2000+ SERIES - Management Traffic and Ethernet Service Separation; Table 15-2 Port Settings - E; VLAN Configuration Using the RADWIN Manager

RADWIN2000+SeriesUserManual Release4.2.40 15‐4
VLANConfigurationUsingtheRADWINManager
EgressDirection
15.5VLANConfigurationUsingtheRADWIN
Manager
15.5.1ManagementTrafficandEthernetServiceSeparation
YoucandefineaVLANIDformanagementtrafficseparation.Youshouldconfigurethesystem
topreventconflictsasdetailedbelow.
Whenconfiguredforthedefaultoperationalmode,a“Providerport”willhandleingress
trafficasfollows:
• FiltersframesthatarenottaggedwiththeProviderVLANID
• RemovestheProviderdoubletag
Therefore,ifaportisconfiguredformanagementtrafficseparationbyVLANandas‘Provider
port’,thenthereceivedmanagementframesmustbedoubletaggedasfollows:
Table15‐2:Portsettings‐Egressdirection
Transparent
Theport‘doesnothing’withregardtoVLANs‐outboundframesareleft
untouched.
Untagall
PortconfiguredtountaguserVLADtagsforallframes.
Filter
IncorrectVLANconfigurationmaycausehavoconyournetwork.The
facilitiesdescribedbelowareofferedasaservicetoenableyoutogetbest
valuefromyourRADWIN2000+Serieslinksandareprovided“asis”.
UndernocircumstancesdoesRADWINacceptresponsibilityfornetwork
systemorfinancialdamagesarisingfrominc
orrectuseoftheseVLAN
facilities.