Radwin 2000+ SERIES - FCC;IC Requirements; Figure 17-1 False Radarm

RADWIN2000+SeriesUserManual Release4.2.40 17‐3
FCC/ICRequirements
Figure17‐1:FalseRadarMitigation
3. TheDFSFrequencyStatusTableatthebottomofFigure 17‐1showsthetime,type
andfrequencyofthelastradarsdetected.Thistableshouldbeusedtoselectthe
bestoption(s)toreduceoreliminatefalseradardetectionwithoutcompletely
blockingoutrealradardetection.
4. Checkthemitigationfeaturestobeused.
5. Whenyouaresatisfiedwithyourconfigurationparameters,clickOKtosavethem
anddismisstheConfigurationwindow.
17.5FCC/ICRequirements
TheFCCrequiresthatdevicesinstalledwithin35kmofanyTerminalDopplerWeatherRadars
(TDWR)locationshouldberegisteredinthevoluntaryWISPAsponsoreddatabase.For
convenience,wesupplyguidelinesaboutthewaythisisdoneinFCC/ICDFSConsiderations.