Radwin 2000+ SERIES User Manual

RADWIN2000+SeriesUserManual Release4.2.40 6‐26
ConfiguringAES256EncryptionSupport
5. CopyandPastethelicensekeysintoaplaintextfileandsaveittoasafeknown
place.
6. OpentheConfigure|Operationstabforeitherradiounit.
Figure6‐13:UsingtheMasterODU(HBS)Configurationbuttonforlicensing
ChecktheLicenseFilebuttonandnavigatetothefileyousavedinthelaststep.
7. ClickActivate.ThenexttimeyouentertheChangeBandstab,thenewbandswill
beavailable.
6.3.4ConfiguringAES256EncryptionSupport
AES256supportisavailablefortheRADWIN2000C+only.
AES256supportisenabledfromtheRT‐A(HBS).
 ToenableAES256Encryptionsupportforasector:
1. EnsurethattheRT‐A(HBS)ishardwarereadyforAES256:FromtheHBSConfigura‐
tionbutton,opentheInventorypageandcheckthatthehardwareversionis9or
higher.Openatextfi leandcopy/pastetheserialnumberoftheRT‐A(HBS
)toit.
2. Repeatstep1fortheRT‐B(HSU).
3. Savethete xtfileandsendittoyourequipmentsupplierwithyourlicensepurchase
order.
4. Youwillreceivebyreturnemai latextattachmentshowingserialnumberand
licensekey .Savethefiletoaknownsafelocation.
5. A teitherODU,opentheConfiguration|Operationstab.ChecktheLicenseFile
buttonandnavigatetothefileyousavedinthepreviousstep.
6. ClickActivate.YocanconfirmactivationbyopeningtheSecuritytab.TheAES265
checkbox,previously grayedout,isnowavailable.
Youmayseeerrormessagesinthe StatusColumnsuchasBandnot
supportedorSerialnotfound.Supportedbandstypicallyreflectyour
localregulations.CheckmissingserialnumberswithRADWINCustomer
Service.

Radwin 2000+ SERIES Specifications

General

Frequency Bands	5.4 GHz, 5.8 GHz
Channel Bandwidth	5 MHz, 10 MHz, 20 MHz
Encryption	AES-128
Interface	Ethernet
Operating Temperature	-30°C to +60°C
IP Rating	IP67